Make DIY stickers with a tape (and create a wonderful tattoo inspired vase)

Posters are an enjoyable and wonderful thing and they are very modern! Did you know that you can make DIY stickers with a tape of your design with a few simple materials? This is a fun craft and even a great way to create your own decor or gifts. We used ancient drawings to create homemade stickers, we have finished a wonderful vase inspired by tattoos with them. This simple and easy tutorial will teach you how to make dedicated stickers using the packing bar that you can use for all types of projects and is very friendly to the budget!

The supplies needed to make your DIY stickers

To create your own posters, you will need some simple supplies: filling tape, scissors, copy, or artistic version printed on a piece of paper (this water -resistant ink with ink), a bowl of warm water, paper towels and/or paper should be Slavery. If you draw your design, use water -resistant pens and signs.

Why packing tape stickers?

Although you can use the printer, or a sticker to print your stickers on a teller printer, it will unfortunately not be water resistant. Both technologies are a great way to create your own stickers, but stickers may be expensive. Create stickers with a piece of clear packing bar not only costly, but also to create a transparent poster as well.

Get your photo for your posters

The first thing you’ll need to know, and how you did it is how to create your image to make your label. You can do this and all types of software, including Procreate, Adobe, Photoshop, or even draw them by hand with marks or pencils to create your own graphics and take a picture of it with your cell phone. If you are not in creating your own image, you can also take antique images or artistic scraps from all over the Internet free of kings. I always recommend the site to the fairy graphics because they have a lot of really fun images that you can use. You can make all kinds of dedicated stickers designs in this way. Even if you do not have Photoshop skills, you can do this on almost any photo program. You can even do this in Word by adding a picture to a word document. Advice: You can draw your stickers but be sure to use a permanent tag based on solvents, not on the basis of water.

Ask your photos on matte paper

In order for this technique to work really, you will need to print your photos on the paper from the printer that uses ink. Ink puffs will not work. Print your stickers on a printer with ink such as a copy device, send them to a UPS store or a printer so that they are printed on a laser printer. The biggest thing is that the printer should have a waterproof ink. For an enjoyable activity, you can also create DIY stickers with a bar with magazine pages and make stickers from these.

Once your photos are printed

Use the scissors to cut the exterior of the image. While regular scissors work well, the use of a specialized type of scissors such as manicure scissors helps to reach the edges and small areas. Advice: When you cancel your photo, turn the image and not the hand pieces with the scissors pair. It is actually easier to cut the image in this way.

Add a tape from the net tape to the image

After getting rid of your image, place a piece of tape on the image and soften it. If the image is larger than width of the tape to create a larger sticker, use multiple pieces to create a layer of packing bar and make sure the edges overlap are adhered to each other as the ribbon pieces meet. It was clicked firmly to ensure that the image was adhered to the tape tape and remove any air bubbles.

Put pictures recorded in warm water

Once you press your photo by placing it firmly in the warm water container, let it sit for a moment until the paper is saturated. Start carefully scrub the paper from the back of the image to remove it. You may even find that the paper begins to exfoliate a little alone if it is in the water for a long time enough. In the end, all you will leave is a clear picture on the back. From your tape.

Let DIY stickers dry over a university degree sheet

Place the tape to dry the sticky side of the tape up on a chipper paper, and the thieves will return to it and your poster is easy to use! If your packing bar sticker dries and contains white fog, prepare it again in warm water and continue to remove support.

What is the best way to store packing tape stickers?

Dry your posters completely when finished and make them ready for you, so that you can either keep it on wax paper, a piece of chromatic paper, or even the silicone baking sheet for long -term storage. This will help you be able to use it to keep their disease and you can move it easily for use.

Make a bowl inspired by your tattoo with a recycled bottle and your DIY stickers

We used Vintage Valentine, Easter and Floral photos from The Graphics Fairy to create stickers for our tattoo inspired disease. This is a quick way to create something beautiful and dedicated with simple steps. Once your posters dry out, take a clean, recycled bottle and start applying stickers outside.

Start with the largest stickers first, then fill the back with smaller stickers until you fill the outer part of the bottle. This is an interesting project for decor, lovers DIY and children of all ages and easy to make!

For more fun projects, try making

DIY heart shape

– Flowers of coffee filter

-A pillow of margin