Understanding prevents me from starting our bedroom wing (details I am still trying to find out)

This is how my mind works, and this process has been for years until now. When it comes to building furniture, this entire process is easy and direct in general. For example, the construction of a small writing office is not taken with a lot of planning. This is easy as they come.

But when it comes to a full room filled with anti -brown, such as a store, kitchen or wardrobe with a washing area in the back, the process becomes a little more complicated. This is where I found myself stuck for at least a month now. There are only some details that I haven’t been able to work yet. I know I will arrive there, but it takes more time.

The weather has recently been cold, wind, and wet, which means that my outdoor projects were advancing at the snail pace. Often, I thought I should take advantage of that time by starting the floors in our bedroom wing. But one of the details that I am trying to work may affect the floors. So you are somewhat in a knot style until these details are placed.

But I apply to myself. Let me reserve a little and start with one of the road barriers I discovered yesterday. This barrier was with the central island in the treasury area.

I have a island 2 ′ x 5 ′ planned for the room cabinet area. If this room will be just a wardrobe, there will be no problem at all. I will only build an island and accomplish it. This is simple as building any other piece of furniture with drawers, then add the base panels, and the BacAli, and a quarter of a round along the bottom so that it looks integrated.

But this is not just a wardrobe. It is also a washing room, and the washing machine and dryer will be at the back of the room. This means that if you need to buy a new washing machine and dryer, I need to be able to get out easily. Or if the reform I need ever, I need to be able to move it inside and outside. I can’t do that if there is a large island built into the center of the cabinet.

So I was trying to think about how to make an island on wheels while making it look built as well. I couldn’t think about a way to do this in a way you were satisfied with it. Then yesterday, I realized that I was difficult in this way. Why do you need to look like a built -in island? I can only build it to look like a resounding piece of furniture that has been re -prepared as an island. I saw him a thousand times. I am sure we have all seen pictures of people who replace beautiful cabinets such as the kitchen islands, or even the new kitchen islands that were built to look like a stand -alone piece of furniture.

This is what I will do. The island will be a stand -alone wardrobe, and it will not bothered me until it made it look built. In this way, it can be easily transferred from the road if necessary. I was making this way very difficult, and I commented in my head that he needed to look compact. Once this idea exceeded, the solution seemed clear. This is from yesterday, the first problem was solved.

But all other road barriers are related to the washing area at the back of the cabinet. When I think about the entire process from start to finish, this is where I remain stuck. The first thing I can not decide is the floors. At the beginning of December, I shared with you all that I was thinking about using Tile Penny for this field and really creative and fun with Tile Penny. But that was when you had planned this area larger, with a washing machine and dryer sitting alongside the bank of wardrobes from floor to ceiling on the opposite wall. So the back washing area was between five and six feet in the depths of the back from the cabinet cabinet to the window wall. It seemed more like this …

Now that the area has become much smaller, it abandoned the idea of ​​a fun design on the ground with Tile Penny. But I am still thinking about laying tiles in that area just because it looks more practical than solid floors in an area with water lines that come to the room to both the washing machine and the dryer. This is still a good idea for me, but is it really worth it? I mean, let’s be honest. If the washing machine or dryer starts to leak, then this area is very small so that it seems to be definitely affecting solid floors. In other words, there is no way to ensure that the leakage contains that small area.

Certainly, any leakage in this field will affect the tanks that are supported on both sides of the washing machine and dryer, and I imagine that solid floors there will also be affected.

My first idea was to buy the statue base drawers available for a washing machine and dryer. The drawers will be useful and will match a washing machine and dryer, after which I could set everything on a low trading platform. But I also searched for other basic options and found that there is a base with a designer top like the pan and has a surplus drain (continued link).

This may be the exact solution I need, but I can’t find a solution that really looks nice. So I am thinking about building my country. In this way, I can make it look like I want to look at it, and this would eliminate the need for any tiles in this field at all. I can do hard wood floors all the time, and I am confident that any leakage will be arrested and re -directed. And if the leakage warnings are placed on the two devices, then surely I can pick up any leak before any damage occurs. In addition, I could put it on wheels so that it could be easily transferred into this narrow space.

Finally, I am still trying to find out how to connect/dried channel/uncooked in such a narrow space. There will be no space to roam in the dryer, so everything must be done from above. Currently, there is no channel for a dryer in the room, so I can put it anywhere I want to go to. I am thinking about buying a magnetic channel conductor (the subordinate link) and placing the channel in the wall so that it is behind the channel directly on the dryer.

This seems to be the best option you have found so far. According to reviews, it contains a strong magnet and works very well. But this will take some very accurate measurements to get them in the right place so that the two pieces are largely connected (perhaps with a little direction with me at the top of the dryer and the use of the long seizure tool), but I will not know where you should go until I get the path plans.

These are the details that I was thinking about. I know that you are keen to start the bedroom wing, and I can guarantee you that I am more worried to see this project begins. But until I make all these decisions and moved on the roads away from the road, I cannot even start the floor. I feel like I am very close to identifying these details.